Home

BLOODHOUND
Education

The Bloodhound Project Wheels

Bloodhound SSC Vehicle Technical Specification: configuration 11, June 2012

 

Wheels

 

Definition Unit Target Status Comment
Wheel Diameter mm 900 915  
Wheel Width mm 150 120  
Number of Keels   2 0 No Keels – V-shape
Keel Height mm 15 0 No Keels – V-shape
Keel Width mm 8 0 No Keels – V-shape
Wheel Weight kg <100 105 Base Design Aluminium Alloy.
Wheel Rotating Inertia kg.m2 <5 11.115  
Peak Wheel RPM at 1050 mph rpm 10304 10304  
Specific surface loading (kg mass / mm wheel width) kg/mm <13 15.6 Based on 7500kg, 120 mm wide
Contact area will be very small at high speed

 

 

 


 

DISCLAIMER:

BLOODHOUND Programme Limited has provided this data as advisory and indicative and specifically and exclusively for the purpose of education. All facts, figures, concepts and principals provided relate only to the BLOODHOUND project. They may be inaccurate, out of date and subject to revision without notice. Under no circumstances should the data provided (or any derivative thereof) be used in whole or in part for any project, except in a purely theoretical environment. It should be understood that the entire project is experimental with high levels of personal risk and danger.

BLOODHOUND Programme Limited, its directors, designers and associates do not accept any responsibility or liability whatsoever for use by any party of the data provided in breach of these terms.

All data provided by BLOODHOUND Programme Limited is confidential and proprietary to the BLOODHOUND Programme Limited. All such data shall only be used for the purposes of education and shall not be used by any party for commercial gain.